+971 4 262 3337
قم بالتبديل إلى Dark Mode

Octofiber ABS Filament للطابعة ثلاثية الأبعاد 2.85 مم - 0.75 كجم ، أبيض كريمي

كود التخزين: 18462
الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.

الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.



معلومات Octofiber ABS Filament للطابعة ثلاثية الأبعاد 2.85 مم - 0.75 كجم ، أبيض كريمي


2.85mm Octofiber ABS Cream White filament is just a perfect but not-standard color. It has the high Octofiber quality finish. Depending on the temperature and speed settings of your printer, you can obtain different surface gloss. This new color is based on the basic RAL 9001 color specification and can be used for a variety of projects. A famous one is the Bits and Bytes chair by Joris Laarman.

Ranging from ornaments to functional objects, this filament helps you out. It comes in the well-known Octofiber cartridge box, which keeps it untangled and dustfree as long as you have it.


General

Octofiber ABS is produced from an optimized ABS polymer and carefully monitored pigments and is processed under the highest quality controls. This ensures a consistent product, with accurate printed objects as a result. PLA is well known for its good 3D printing properties and is suitable for many applications where you can use thoughness, temperature resistance up to 75 °C and a matte surface finish.


Printer compatibility

This 2.85mm product is compatible with most 2.85mm 3D printers equipped with a heated bed. We have tested Octofiber on a variety of machines; Repraps and Ultimakers of course. All with different (dual) hotends, and nozzle diameters. We are pretty sure that it will work with your machine if it looks like one listed below:

- Ultimaker 2
- Velleman K8200
- Reprap 3mm


Printing guidelines

The values below are a safe starting point to obtain good results, but may not be optimal for your printer. for example a delta printer can achieve much higher speeds than a direct drive would. Anyways, contact us if you cannot get it working.

Printing speed30-60mm/s
Bed temperature95 °C
Nozzle temperature225 °C


Use them as a starting point, optimal values for your specific printer may vary from the values shown above, depending on e.g. nozzle diameter, exact printing speed and layer height to name a few. 


Bed adhesion

Many strategies are possible to get Octofiber ABS properly to your print-bed: clean glass, blue painters tape, glue stick, hairspray, special 3D printing stickers. Whichever option you choose, a heated bed is advised, as it increases bonding and reduces the warping process.

قراءة المزيد

المواصفات Octofiber ABS Filament للطابعة ثلاثية الأبعاد 2.85 مم - 0.75 كجم ، أبيض كريمي

جنرال لواء
العلامة التجارية
كود تخزين مايكروليس
  • 18462
تاريخ متاح الأولى
  • 11 سبتمبر، 2017
وزن المشتريات
  • 0.75 كغ
Diameter
  • 2.85 mm
Material
  • ABS
اللون
  • Creamy White

قد تكون مهتما بالتالي



تقييمات المستخدمين Octofiber ABS Filament للطابعة ثلاثية الأبعاد 2.85 مم - 0.75 كجم ، أبيض كريمي

0
لا يوجد تقييم
كن أول من يقيم هذا المنتج

أشكركم على التصنيف!
اكتب مراجعة كاملة.
اختر الصور